Izdelki za jeklena jekla (677)

Readymesh MX-500 Readymesh MX-500 is a special carbon steel fibre, obtained by the extrusion and cutting of high-strength steel wire. Its special double-hooked form gives it a remarkable shear strength, thus conferring the concrete with excellent post-cracking structural strength even at low doses. Readymesh MX-500 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour. General preparation of fibre-reinforced concrete with high pre and post-cracking performance. Ideal for industrial flooring and prefabrications. "Readymesh MX-500 fibres must be added to the concrete during mixing. It is recommended to pour the fibres directly onto the loading belt of the concrete mixer during the loading of the aggregates. Alternatively, it is possible to add them directly into the mixer after loading the concrete. In this case, add the fibres a little at a time so that they are well-distributed in the cement mix and extend the mixing time by at least one minute for every 20 kg of fibres added in order to achieve optimal distribution. Conglomerates with Readymesh MX-500 can be easily transported and used with pumps, joiners, vibratory finishing machines, roadway extruders (e.g. slipform paver), etc." Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag Unit: €/kg

ART. 838 CERNIERE PESANTI IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):50 x 40 x 1,3 Pollici:2

Frattazzo americano Lama in acciaio inox Manico in bicomponente per garantire una presa salda e confortevole Lama dentata Dimensioni: 28x12cm

Product Diameter Tolerance Reference Black annealed wire 0,70 mm ÷ 10 mm ± 0,05 mm UNI EN 16120-2 Black annealed wire cut in bars Cut on demand (from mm 200 to mm 4000) 1,50 mm ÷ 10 mm ± 0,5 mm (from mm 200 to mm 1500) ± 1 mm (from mm 1501 to mm 3000) ± 2 mm (from mm 3001 to mm 4000) UNI EN 10277 Black annealed wire cut in bars with loops Cut on demand (from mm 2000 to mm 6000) 2,50 mm ÷ 3,50 mm ± 2 mm

Anche in questo settore, Metal Leghe è in grado di offrire elevati standard di realizzazione come si richiede in questo genere di processo altamente performante. Al di là della produzione ordinaria, la nostra azienda ha concentrato i suoi sforzi per offrire “centrifugati” che possono raggiungere dimensioni fino a 2 metri di diametro. Tutto questo, garantendo grande competitività per: dimensioni personalizzate massima riduzione dei difetti

Fer Metal si occupa anche della produzione di maniglioni singoli in acciaio inox. Due i punti di fissaggio, si adattano a porte in vetro o legno.

Tubo in acciaio inox flessibile ed estensibile, per gas, a norma UNI-CIG 9891. Rivestimento isolante con guaina anticorrosiva, autoestinguente, atossica. FL288/20 MF 12:100/200 mm G 1/2” MF FL288/40 MF 12:200/400 mm G 1/2” MF FL288/20 MF 34:100/200 mm G 3/4” MF FL288/40 MF 34:200/400 mm G 3/4” MF FL288/20 MF:100/200 mm G 1/2”M-G 3/4” F FL288/40 MF:200/400 mm G 1/2”M-G 3/4” F FL288/20 MF 1:100/200 mm 1” MF FL288/40 MF 1:200/400 mm 1” MF

Valvola a sfera a passaggio totale, filettatura M/F, con leva in alluminio.

Elementi base per il riscaldamento elettrico consentono tutti i tipi di trasferimento del calore e vengono realizzati in rame, ferro, acciaio inox, incoloy. La possibilità di ottenere le più svariate forme e dimensioni li rendono adatti a tutti i settori industriali.

da più di 10 anni produciamo componenti strutturali in acciaio sinterizzato

Diametro da mm 8 a mm 16

La tempra di solubilizzazione è consigliata per dare elasticità agli acciai. La solubilizzazione viene effettuata ad una temperatura compresa tra i 1000° e i 1200°. Alfa T.T. realizza questo processo di trattamento dei metalli per articoli quali: raccordi, rulli, cappellette, pali.

Mevar srl realizza articoli con la tecnica di stampaggio a freddo della tranciatura della lamiera. Con questa tecnica vengono realizzate sulla lamiera sagomature, fori, asole e forme di qualsiasi tipo.

For more than 50 years we have been building ‘RAPID’ series Electric Pumps, with flexible elastomer impeller and AISI 316L stainless steel pump body Maximum Efficiency and Temperature Control in Fluid Transfer The ‘RAPID TERMICA’ series is at the forefront of the fluid transfer sector, integrating the established performance of the ‘RAPID’ series with an innovative temperature control system. Thanks to the presence of a heating and cooling chamber, the RAPID TERMICA series is ideal for handling and transferring products that need to maintain specific temperatures, both hot and cold, throughout the entire transfer process. The main Technical Specifications of the Rapid Termica series stainless steel electric pump The stainless steel heating/cooling chamber surrounds the pump body and for temperature modulation of the liquids present also allows the use of steam. The flexible elastomer impeller, together with the AISI 316L stainless steel pump body machined from solid bar, ensure perfectly smooth, porosity-free and highly corrosion-resistant surfaces Versatility and Regulatory Compliance Impellers are available in a variety of materials, from food-grade white SILICONE and FDA-certified NEOPRENE (CR) to DUTRAL (EPDM) and NITRILE (NBR), to suit the different requirements of the products handled. Each material is chosen to optimise performance in relation to the type of Adaptability, Power and Ease of Maintenance Like all electric pumps in the ‘RAPID’ series, the THERMAL model is equipped with a standard fixed speed motor (1400, 900 or 700 rpm), with the option of a speed variator or servo-ventilated motor for inverter application. These features make the pumps ideal for the gentle transport of dense or viscous products. The series offers models with flow rates ranging from 2,700 to 24,000 litres per hour, providing great versatility for every industrial need. In addition, the ease of disassembly and maintenance simplifies frequent servicing while maintaining operational efficiency. A Reliable Solution for Every Need With its self-priming capacity and reversibility, the ‘RAPID TERMICA’ series stands out for its efficiency and user-friendliness in a wide range of industrial applications. The wheeled version, with full electrical system, reversing switch and emergency button, offers additional mobility and safety. The possibility of customising the connections, from standard hose connections to DIN, GAS, TRI-CLAMP, and flange connections, allows perfect integration into any system. The ‘RAPID TERMICA’ series is the optimal choice for those seeking the ultimate in efficiency, reliability and temperature control in fluid handling and transfer.

The installation of specific grinding/selection/mixing systems allows us to meet the needs of: • Steel plants (deoxidation/slag fluidization) • Manufacturers of sleeves and ISO/ESO products for steel casting in terms of: * Grain size * Content of Al and other metals * Content of AI203 and other oxides * Percentage of salts * Density * Reactivity * Type of packaging, etc.

We produce keys with sizes from CH 2 to CH 6. They are made of steel, with or without heat treatment, with galvanic treatment. Utmost attention is paid to every single stage of the processing to provide the customer with a highly qualitative and performing product. The entire production process of our company received UNI EN ISO 9001 certification in 2011 already, then renewed in 2017.

NC gear hobbing with standard profiles XL, MXL, T, HTD, GT or special profiles manufactured with special purpose tools. Production of items, which are normally in aluminium, available also in brass, steel or polymer. On request: Galvanic treatments such as anodizing, phosphating, nickel-plating etc… Gear cutting of outer diameters from min. 6mm to approximately 50mm in automatic unmanned mode. Max. Length of parts subject to gear cutting: approximately 100mm. Our company can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders. We can deliver finished products complete with belt containment flanges.

The mixer with unloading by hatches is completely made of stainless steel and it is formed by a double cradle mixing tank with two mixing shafts with intersecting paddles of the same shapes and dimensions. The tank capacity varies between 1.100, 1.500, 2.000, 3.000, and 4.000 lt., bigger capacity tanks are available upon request. Each mixer is available also in the vacuum versions and with CO2 intake. Generally used to obtain quality productions, they are equipped with an unloading system by sliding hatches located on the tank’s bottom. The system allows a perfect mixing of different components and a rapid unloading. This kind of mixers are mainly used to produce sausages, salami and Italian typical mortadella.

The transformers are designed and manufactured according to the following standards: CEI 14-8 identical to HD 726 and HD 464 S1 CEI 14-12 identical to HD 538.1 S1 Accessories Lifting eye bolt for load handling Tow ring bolt Stainless steel plate for grounding connection Terminals for regulation +/- 2X2.5% of nominal voltage Nameplate with specifications Cart with 90° swivel wheels Triad of PT 100 temperature sensors Box with terminal block for connecting the electronic control unit

Nel reparto produttivo disponiamo un area dedicata alle cernite visive al montaggio manuale e/o in automatico di componenti e prodotti a Disegno tecnico in conto lavoro per il Cliente finale.

Raccordi Inox 304 - CURVE

viteria in ergal anodizzata

Le applicazioni che richiedono l’uso di guarnizioni sono praticamente infinite ogni volta che si vuole evitare la fuoriuscita di un fluido, ogni volta che si vogliono accoppiare due componenti meccanici, ogni volta che si vuole impedire il passaggio di un liquido o di un gas, ogni volta che si ha l’esigenza di isolare un ambiente o una parte di esso una guarnizione può avere un ruolo cruciale. Le guarnizioni possono essere montate all’interno di valvole, pompe, cilindri oleodinamici, presse, compressori, alberi rotanti, apparecchi di misurazione, motori, flange, macchine utensili, carter, elettrodomestici e macchinari industriali di qualsiasi settore. Affinché una guarnizione lavori nel mondo corretto, il materiale con il quale viene realizzata deve presentare delle caratteristiche ben definite deve resistere chimicamente al fluido da contenere, non deve aggredire le superfici con le quali entra in contatto, deve resistere alle pressioni e alle temperature d’esercizio

Adatti per tutti gli impieghi dove esistono processi corrosivia tenuta stagna o a bagno di glicerina adatti per condizioni particolarmente gravose, dove ci sono vibrazioni o per l'esterno. Tutte le applicazioni particolari possono essere risolte dalle nostre officine, attacchi, quadranti e/o scale non normalizzate. Ampia diponibilità di magazzino. Certificati ATEX

Per rivestimenti in polvere, elettrostatici per immersione liquida, anodizzazione e platinatura.Ideali per fori passanti. CODICE:CPP10(2) PCS BOX:500

M.E.G.A. S.p.A. has always stood out for its multitechnological capabilities and highperformance manufacturing, efficiently and flexibly carrying out the entire production cycle of each fitting, starting from forging through to the final testing phase and any relevant certifications. STANDARD FITTINGS and UNIONS are high quality products that can be supplied both threaded (according to ASME B1.20.1) and socketweld, as well as SWAGE NIPPLES that are available in all standardised variants threaded, BW, plainend, eccentric. This family of standard products is available in carbon steel, stainless steel, duplex and superduplex stainless steel, nickel alloys, copper alloys, titanium and others. The material can be certified NSF 61, NACE, PED, and Norsok.

Valvola a sfera in acciaio inox AISI 316-CF8M, filettatura F/F, a passaggio totale. Limiti di temperatura:-20° +160° Vuoto:10-2 torr

Porta con anta completamente in cristallo trasparente temperato e stratificato mm. 8+0,76+8. Telaio in ferro rivestito INOX spessore mm. 51, cerniere e maniglia in acciaio INOX. Semiautomatica con ammortizzatore a braccio incorporato nella traversa.

Tensioning clamp for stainless steel strap. 3/8 and 3/4 for straps 9.5mm and 19mm. ENEL Endesa serial numbers 847650 and 847651

Estruso con spessori che vanno da 1,2 mm a 12 mm e larghezze da 10 mm a 55 mm